Free Construction - SPP from polyline

Access

Ribbon : Part Designer > Free Construction > SPP from polyline

iXplorer > Select an element in the Elements palette > Properties palette > Index tab Methods > SPP Construction

General Information

With the help of this function you can extrude a stretchable purchased part along a polyline.

Procedure

After you have started the function you will be invited to select the polyline that shall act as extrusion path.

After that a new dialog with some settings opens.

If an article is selected in the imos Manager during the generation of a part, the new part will be assigned to this article.

Options

Section contour

You can define the section contour for the SPP in two different ways.

Select an existing contour:

Choose a section contour out of the dropdown box or switch to the Element Manager by a click on the button with the three dots.

Select section contour:

After you have clicked on the button with the arrows your courser will turn to a pickbox. With the help of the pickbox you can select a polyline in the drawing.

Rotation angle With the help of this function you can rotate the section contour.
Offset The setting moves the stretchable purchased part parallel to the polyline. You can insert a positive or negative value.
Z Offset A positive value moves the stretchable purchased part upwards.
Create Manufacturing Data You can define if manufacturing information for this part shall be created.