Free Construction - Contour part
Access
Ribbon : Part Designer > Free construction > Contour part
iXplorer > Select an element in the Elements palette > Properties palette > Index tab Methods > Free construction
General Information
For creating a contour part, a closed polyline is required or an already existing part from which the new part should be derived.
Procedure
After you have started the function invites you to select a contour. After that a dialog opens. In this dialog you can define the properties of the part.
If an article is selected in the imos Manager during the generation of a part, the new part will be assigned to this article.
Options
| Part type | Choose one of the part types. The part type has an effect on the part position on the machine table and the edging. |
| Part Definition | Inside the combo box you can see the last part definitions. Via a cklick on the button behind the entry you can switch to the Element Manager where you can choose a part definition. |
| Core material |
By default the material from the defined Part Definition is used as the core material for the contour part. Besides, another core material can be defined separately here as well. When calculating the part thickness, the thickness of the core material with the coating from the Part Definition is added together. |
| Offset | A positive value moves the part bottom-up, based on the polyline. |
| Edge offset | The settings moves the edges of the part parallel to the polyline. A positive value results that the edges will be moves into the part, the part will be smaller than the polyline. |
| Flip | If you choose Yes the part will be flipped. |
| Reference edge |
The base line defines the edge on the hinge of the machine table. With the help of the combo box you can define an edge as base line. |
| First edge | The edge number 1 has an effect on the edging depending on the part definition. |
| Part thickness |
The parameter is automatically filled with the thickness from the PD, respectively the selected core material. The thickness can also be changed subsequently.
It only make sense to change the value if a material is used that was set up independently by the thickness, i.e. solid wood. In this case it makes sense to set the value of the characteristic Keep Thickness to Yes . For the event of a subsequently change of the material, the entered part thickness that is used for the graphical illustration, is not replaced by the default thickness of the assigned material. The normal case is the use of a material that is independent on thickness, i.e. PB19. The "part thickness" should not be changed in this dialog and "Keep Thickness" should be set on "No". This ensures that the thickness of new assigned material is also graphical used after changing the material of the part. |
| Create Manufacturing Data | You can define if manufacturing information for this part shall be created. |
| Keep Part Thickness | If you chose Yes , the value of the field Part Thickness will be used. Independent of the thickness of the used Part Definition. |