imos Options - General

Access

Ribbon : System > Order > imos Options

Options

Connection to database

Auto-Login

When the function is activated, login is not required when imos starts up.

Server

Pre-set the server on which imos is to register.

Datenbank

Pre-set the database where imos is to register.

User

Pre-set the user who registers with imos .

Password

This is the password that has to be entered when registering.

Start-Visu-Level

With this setting you can define which visualization level in the Visu Manager is set at the start of imos .

Slide the control to the desired level. The settings of the visualization level can be checked in the Visu Manager.

Barcode Configuration settings of the barcode output.
Open Manager at Start

When activated, the imos Manager is always shown when starting imos . When deactivated, the Manager has to be switched on in the menu.

In the menu Manager start tab, those tabs that are supposed to show up on startup can be defined. The numbers stand for the tabs ordered left to right.

1 = Insert

2= Details

3= Viewsets

4= CAM

Closing contours automatically

Define what is to be done when closing a contour.

Show warning message

A warning message will appear if the contour has not been closed.

Always close contour

The contour is always closed.

Never close contour

The contour is never closed.

Reset Element Manager

The function resets the layout of the Element Manager to the default layout.

The function hasn’t an effect on any data.

Reset Order data dialogue

The function resets the layout of the Order data dialog to the default layout.

The function hasn’t an effect on any data.

Reset position of palettes

The function resets the layout and size of all iXplorer palettes to the default. Among others, there are

  • the Room Planner palette
  • the Configurator palette
  • the iXplorer Properties palette
  • the iXplorer Elements palette
  • the iXplorer Article Center

The function hasn’t an effect on any data.

Open configuration file

Opens the user specific configuration file.

Important note: do not apply changes without consulting the Service Hotline.

Incorrect changes may render the software unusable. Finding the error in hindsight is often difficult or infeasable.

Language settings The language can be selected in which imos operates.
Units

Defines whether the information in the measurements made ​​in imos MM or INCH.

AutoCAD is unaffected.

General Information

All measurements are specific for imos to the selected unit on and output.

More info

Render Preferences

The path for the VRML texture is required in order to represent the assigned materials.

The entries parts/ subassembly determine which group structure is to be displayed in Cinema 4D.

imos Manager

With this you can indicate which information of the parts and assemblies are shown in the Manager. The first field is a freely editable text field. If you change, for example, the entry ID to Ident this entry will be shown in front of the part information.

ID

Automatic assigned ID number to the part or subassembly.

part

Group name of the part It can be overwritten with the entry of the part description in the manufacturing information. It can be used only on part levels. On the subassembly level nothing is exported.

Constr. Type

On the part level: the used construction principle of the part is exported. On the subassembly level: the assembly name is exported.

Part type

On the part level: the part type is exported. The part type is assigned automatically. On the subassembly level: the subassembly is always exported.

Insertion point

Insertion point of the part or subassembly.

Orientation

Orientation of the part or subassembly.

Comment 1

Comment 1 of the part or subassembly.

Comment 2

Comment 2 of the part or subassembly.

Internal imos ID

Generated Barcode of the part or subassembly.

Def-Dim-Reference Definition of default values for the reference points of the Linear Division in Article Designer.
Online-Calculation Activate the Online Price Calculation. With this selected in the Manager, the price of the selected element is calculated and shown at the end of the list. It is important to note that the activation of this function essentially needs more performance and therefore the response time can increase.
Price Precision

Determines the accuracy in the part price calculation.

When deactivated, the prices are calculated as before based on the finished size. When activated, the prices are calculated based on the cut sizes, profile trims, oversize etc.

Document Manager WMF black/white When the function is active, the previews will appear in the Document Manager in black and white.
Use favorites The function activates the favorites in the Element Manager, Order dialog etc.
Document Manager

Image-background colour

Defines the background colour for the drawing output of the Document Manager.

The AutoCAD- drawing background colour is applied for the labeling output with the current background colour .

It is possible to select between white and black as well.