Article Designer - Toolbar
Access
iXplorer Parametrics: Article Designer Top View/ Front View/ Side View/ from Contour > iXplorer Elements Palette > Tab Parametrics
General Information
The Article Designer tool bar is located at the top of the Parametrics tab, above the elements tree; It holds general functions and indicators.
Options
| Construction mode | The icon shows which construction mode you have selected. You see immediately whether you create an article in plan view, in side view or in front view. |
| Save article |
Press the button with the Floppy Disk symbol to save the article in the Article Manager. Clicking the button opens the Save Article dialog. |
| Isolate article |
Isolates the article you currently edit in the drawing area. Meaning, all other objects will be hidden. Click the button again to lift the isolation. Tip: For a better performance, we recommend not to insert too many articles in a single order. |
| Show Construction on/ off |
Switches from simplified to detailed preview of the construction in the drawing area without having to exit parametric mode. The article is completely recalculated and rebuilt with each change. The article can thus be checked directly. For example:
The detailed preview is more processor-intensive than the simplified preview. Switch off "Show construction" to ensure a fast response time when constructing. Note: The level of detail in the detailed preview depends on the set visualization level. |
| Apply | Applies the changes on the article and quits the Parametrics mode. |
| Discard | Discards the changes made on the article and quits the Parametrics mode. |
| Height/ Width/ Depth |
The fields for the article dimension are filled with standard values first depending on the selected construction type and the applied outline geometry. The dimensions can be modified at any time by just clicking in the field and entering another value. The entered value defines respectively the complete height/-width/-depth of the article in mm. Decimals are separated by a point in AutoCAD. |
| Dimension calculation (Dimension references) |
To access the Dimension Calculation fields, click the accordion arrow next to the standard dimension fields or click one of the buttons in the dimension fields. With the dimension calculation you can define e.g. a grid (for example the height of a folder) for the article dimension or a fixed dimension for the article. With a fixed value the article dimension cannot be modified when creating the article in the drawing section. In the fields Default and Formula , you enter values that interact with each other. The default value is the basis for the formula. When you define a dimension calculation for one of the article dimensions, the button in the corresponding dimension field will be highlighted. Examples for the height: Default = 1000 Formula = 1[300] (with this entry a grid of 300 mm is created) These values enable the article to be set with a height of 900 mm by default. 900 mm is the height which is the nearest to the default and achieves the condition of the formula at the same time. By creating the article in the drawing section, the article can be modified from 300 mm step by step in the height. For example, if the article should be inserted with a possible height from 500-600 mm, then this can be defined by a descriptor. The Descriptor should look like this: if 1mm<=X<499mm 500mm if 500mm<=X<600mm X mm if 601mm<=X<10000mm 600mm DEFAULT 550mm If you do not enter a formula but a fix value for the article height, width or depth in the field, you do not have the option to change the article during insert. Via a click on the button you will switch to the dialogue of the linear division. With the help of this dialogue you can modify and test the formula. |
| Quick access |
List of paths/ shortcuts to Article Designer zones and elements added and named by the user for quick access. Click on a shortcut to select the corresponding element in the tree instead of clicking through the tree structure. See Add to quick access . Select an object using a quick access shortcut:
Rename a quick access shortcut:
Result: The entry has been renamed. The dialog remains open so that you can change further entries. Click outside the dialog to close it. Delete a quick access shortcut:
|
| Search with real-time suggestions |
The search goes through the property fields of all elements in which entries can be made. Namely:
The search makes suggestions as you type. The search starts automatically after you have entered at least 2 characters and lists suggested results in real-time. In the results, the following actions are available:
|
Related topics
- Overview Article Designer