Operation*
Access
imos Ribbon : Main data > Main data > Element Manager > Calculation
Organizer > Tab Element Manager > Calculation
General Information
Operations define a work process. Operations are defined by the assigned cost centers and stored times.
Operations are assigned to a routing.
If the operation is the type Machining , then this operation is automatically assigned to the imos object that contains this modification.
This means that the costs for this work step are automatically included in the calculation consisting of from/to data.
Options
Default settings
| Type | The type of the operation is important the following assignment to a routing. |
| Notes | Editable text field. |
| Sequence | Defines the sequence of the operations in the routing. |
| Cost center | Cost center assignment |
| Mark up Factor | The entered value is applied as a multiplicator for calculating the material costs. The factor is multiplied with the costs. |
Machining
This option is shown only if it is an operation of the type machining .
| Machining |
With the kind of machining the following kinds can be selected:
If it is a machining of the type rectangular pocket , then a minimum and a maximum depth as well as a minimum and a maximum area can be specified for this. For the other machining the depth as well as a minimum and maximum diameter can be specified. |
| Depth Min. & Max. |
Via the information of the minimum and maximum depth, different operations can be defined for different machinings. That means that it is a kind of condition that defines which times are used for which depths. Depending on the orientation of the machining it can be necessary to define a negative value. |
| Diameter Min. & Max |
The diameter can be defined for the machining types Circular pocket , Drilling , Lineboring and Groove . Via the information of the minimum and maximum diameter, different operations can be defined for different machinings. That means that it is a kind of condition that defines which times are used for which diameter. |
| Area Min. & Max. |
The area is only activated for rectangular pockets . Via the information of the minimum and maximum area, different operations can be defined for different machinings. That means that it is a kind of condition that defines which times are used for which area. |
| Orientation | Defines the orientation of the machining. Choose between horizontal and vertical . |
Times
| Times n |
The total time for the production step is the sum of the times. The setup, process and share times are totaled and the calculated times from the formula fields.
The times can also be defined with formulas. To facilitate the definition of the formulas, you can access a list of all placeholders via the fx button. For a detailed description of the placeholders please refer the chapter Wild cards for formula fields in the production steps . |
Further topics
*) This function is optional and is not included in the basic version of imos .